Firmware PAC Aldo T7Q

Model Name  : sp7731geaplus_k03_yingfu_64_8_dt

Model Brand : ALDO

Model Device: scx35_sp7731gea_k03_yingfu_64_8

AndrVersion : 5.1

BaseBand CPU: SP7731GEA_K03_YINGFU_64_8

Project Ver : LMY47D release-keys

Model Ext   : T7Q


Bahan :


1. Download Firmware PAC Aldo T7Q 

2. Download SPD_Upgrade_Tool_R4.0.0001 atau Download Disini

3. Driver SPD by InfinityBox

4. Tutorial Flash via research here





Cara Flash Aldo T7Q via Research Download


Log Read Firmware PAC Aldo T7Q

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geaplus_k03_yingfu_64_8_dt
Model Brand : ALDO
Model Device: scx35_sp7731gea_k03_yingfu_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_YINGFU_64_8
Project Ver : LMY47D release-keys
Model Ext   : T7Q

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2518 MiB
Saved to : F:\andro3\aldo\t7q\SP7731GEA_K03_YINGFU_64_8_scx35_sp7731gea_k03_yingfu_64_8_5.1_LMY47D_release-keys_T7Q\
Done!