Flash Hisense HS-L695

Link Download
Berikut link untuk ROM TF update nya :
Pureshot HS-L671 : L671_L1115.6.07.00.ID00_201604021112
Pureshot+ HS-L695 : L695_L1117.6.07.00.ID00_201604050105
flash Hisense HS-L695  via 9008 DOWNLOAD DISINI

Cara Pakai
Untuk membalikkan HH yang sudah custom/root kembali ke official, tinggal pake TF update ini. Caranya
1. Download dulu TF update nya sesuai Pureshot/+ agan. Pureshot HS-L671 sedangkan Pureshot+ HS-L695.
2. Ekstrak keluar dan taruh bin nya (L671_v1.bin atau L695_v1.bin) di microsd, di folder luar (/sdcard1)
3. Pastikan HH sudah tercas minimal 50% ke atas (disarankan full karena update sangat menguras batere).
4. Matikan HH dan hidupkan dengan cara Tekan Power + Vol Up + Vol Down secara bersamaan, dan akan ada progress update nya. Karena perlu tekan 3 tombol sekaligus, makanya TF update ini sering disebut sebagai jurus 3 jari.
5. Tunggu hingga selesai dan muncul "Successfully". Tahan power lama untuk restart HH.
Semua partisi yang sudah dimodif akan kembali ke Stock ROM, perawan ting-ting. Status di bootloader : Official

Sebelum nyoba ingat untuk backup dulu data user app dan internal storage, karena kemungkinan semua data akan kena reset.

Firmware Advan S4+ Build No: P968/HCT-MBC1-A2/MTK6572M

FIRMWARE FLASH Advan X7 FREE

Stock ROM Advan X7

1. miki_s9710_advan_x7_v23_intel.zip
2. file tested pada miki s9710 advan x7 v13 intel.zip 
3. miki s9710 advan x7 v25.0.2 intel_sofia 3gr 2015-12-04_16-17
4. miki s9710 advan x7 v28 intel sofia 3gr 2015-12-26_09-08
5. miki_s9710_advan_x7_v29_intel_sofia_3gr@2016-01-27_11-18

Flash Hisense HS-L695 

ROM Flash Advan E1C Pro

FIRMWARE FLASH Advan E1C Pro FREE

Stock ROM Advan E1C Pro

• E1CPro_MT8312D_P7123C_V20_MT6571_V1.29@2015-12-02_08-52(8GB)
• E1CPro_P7025C_MT8312D_P7123C4.4.2_V23MT6571_V1.29@20160303_19-26(8GB)
• E1CPro_P7025C_MT8312D_P7123C_V16_MT6571_V1.29@2015-09-25_10-58(8GB)
• E1CPro_P7025_MT8312D_P7123-01_4.4.2_V04_20140821_MP7@2014-08-25_19-15
• E1CPro_P7025_MT8312D_P7123-01_4.4.2_V07_20141203@2014-12-03_15-55
• E1C_Pro_P7025_MT8312D_P7123-01_4.4.2_V11_20150619@2015-06-19_18-16

Download Firmware PAC Mito A72

Model Name  : sp7731geahdrplusoversea

Model Brand : MITO

Model Device: scx35_sp7731gea_hd

AndrVersion : 5.1

BaseBand CPU: SP7731GEA_HDR

Project Ver : MITO_A72_ANDROID_5.1_T14_20150825

Model Ext   : MITO_A72


1. Download Firmware PAC Mito A72

     Firmware PAC Mito A72 (T14) atau Download Disini
     Firmware PAC Mito A72 (T15) atau Download Disini
     Firmware PAC Mito A72 (T19) atau Download Disini


2. Download Research Download R2.10

3. Driver SPD by InfinityBox

4. Turorial Flash via research here



Cara Flash Mito A72 via Research Download



Log Read Firmware Mito A72

Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geahdrplusoversea
Model Brand : MITO
Model Device: scx35_sp7731gea_hd
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : MITO_A72_ANDROID_5.1_T14_20150825
Model Ext   : MITO_A72

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1285 MiB
Saved to : E:\InfinityBox\CM2SPD\Flash\SP7731GEA_HDR_scx35_sp7731gea_hd_5.1_MITO_A72_ANDROID_5.1_T14_20150825_MITO_A72\
Done!

Firmware PAC Aldo T7Q

Model Name  : sp7731geaplus_k03_yingfu_64_8_dt

Model Brand : ALDO

Model Device: scx35_sp7731gea_k03_yingfu_64_8

AndrVersion : 5.1

BaseBand CPU: SP7731GEA_K03_YINGFU_64_8

Project Ver : LMY47D release-keys

Model Ext   : T7Q


Bahan :


1. Download Firmware PAC Aldo T7Q 

2. Download SPD_Upgrade_Tool_R4.0.0001 atau Download Disini

3. Driver SPD by InfinityBox

4. Tutorial Flash via research here





Cara Flash Aldo T7Q via Research Download


Log Read Firmware PAC Aldo T7Q

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geaplus_k03_yingfu_64_8_dt
Model Brand : ALDO
Model Device: scx35_sp7731gea_k03_yingfu_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_YINGFU_64_8
Project Ver : LMY47D release-keys
Model Ext   : T7Q

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2518 MiB
Saved to : F:\andro3\aldo\t7q\SP7731GEA_K03_YINGFU_64_8_scx35_sp7731gea_k03_yingfu_64_8_5.1_LMY47D_release-keys_T7Q\
Done!